Subject Architecture Architectural AutoCAD

Question

Questions 1 to 20: Select the best answer to each question. Note that a question and its answers may be split across a page break, so be sure that you have seen the entire question and all the answers before choosing an answer.
1. Two design engineers are discussing the printing of drawings created in AutoCAD. Engineer A says that pen widths are stored in the AutoCAD file template. Engineer B says that the line type of an object could be changed using the Properties panel. Which of the following statements is correct?
A. Only Engineer A is correct.
B. Neither Engineer A nor Engineer B is correct.
C. Both Engineer A and Engineer B are correct.
D. Only Engineer B is correct.
2. Which of the following line types is drawn with a thick, continuous line weight and is typically used to show edges and boundaries?
A. Center line
B. Hidden line
C. Section line
D. Visible line
3. Imagine that you're drawing an orthographic projection that will show the repeated detail of the coil of a spring. Instead of drawing the entire coil, you could use a _______ line to indicate that the detail repeats.
A. phantom
B. hidden
C. section
D. break
4. The AutoCAD command that can be used to create objects that are combinations of lines and arcs is called the _______ command.
A. SPLINE
B. PLINE
C. RAY
D. PEDIT
5. While using AutoCAD, you want to continue an existing line to meet the boundary of a nearby object on your drawing. This operation would best be performed with the _______ command.
A. EXtend
B. SCale
C. Move
D. BReak
6. Which of the following AutoCAD commands can be used to construct objects (such as a title block) that can be saved and reused?
A. STyle
B. LTSCALE
C. LIMITS
D. BLOCK
7. The AutoCAD coordinate layout system that's always accessed at the bottom left corner of the AutoCAD drawing window is called the _______ coordinate system.
A. relative
B. polar
C. user
D. world
8. Imagine that you're creating an orthographic projection using AutoCAD. Your drawing will require the following line types: hidden, center, visible, dimension, and construction. How many layers will you create for the required lines?
A. 4
B. 3
C. 5
D. 6
9. Which of the following line types can be used to indicate that two visible holes will be drilled along the same line?
A. Symmetry lines
B. Connecting center lines
C. Extension lines
D. Phantom lines
10. Which of the following icon functions in AutoCAD performs many of the same functions as the CHPROP command?
A. New layer
B. Properties
C. Modify
D. Edit
11. Which of the following AutoCAD features allows you to enter command information in a display near the tooltip?
A. Object snap
B. Modify
C. APPLY
D. Dynamic input
12. _______ are light construction lines that are used to align features and edges of an object between adjacent and related views.
A. Phantom lines
B. Projectors
C. Orthographics
D. Hidden lines
13. Two design engineers are discussing engineering graphics. Engineer A says that engineering drawings should use at least two line widths. Engineer B says that line widths are determined by how important the line is to a specific view on an orthographic projection. Which of the following statements is correct?
A. Only Engineer A is correct.
B. Only Engineer B is correct.
C. Neither Engineer A nor Engineer B is correct.
D. Both Engineer A and Engineer B are correct.
14. Which of the following AutoCAD features is used to control different line types on a drawing?
A. Model space
B. Layers
C. Properties
D. Layout space
15. The collection of AutoCAD commands that are often used to create basic geometric components such as arcs, circles, lines, and rays is called the _______ commands.
A. Plot
B. Draw
C. Create
D. Style
16. Which of the following AutoCAD features allows you to access and quickly execute a menu of commands (such as MOVE, COPY, and STRETCH) by right-clicking on a small box that appears on the object?
A. Temporary track points
B. Tool pallets
C. Dynamic input
D. Grip boxes
17. Which of the following typically defines the limits of a drawing that's created with AutoCAD?
A. The engineering standards applied to the drawing
B. The size of the object being drawn
C. The number of views used in the drawing
D. The paper used to print the drawing
18. Which of the following AutoCAD commands is used to set the size of dashes and dots on a hidden line?
A. STyle
B. LTSCALE
C. EXPLODE
D. SPLine
19. When you're drawing an orthographic projection with AutoCAD, which of the following layers will not be active (turned on) when the drawing is printed?
A. Cutting
B. Hidden
C. Construction
D. Dimension
20. Which of the following steps normally occurs first during the creation of an orthographic projection?
A. Draw the three standard views.
B. Draw center lines.
C. Draw the visible lines of the front view.
D. Draw the right side view.

Solution Preview

This material may consist of step-by-step explanations on how to solve a problem or examples of proper writing, including the use of citations, references, bibliographies, and formatting. This material is made available for the sole purpose of studying and learning - misuse is strictly forbidden.

1. Two design engineers are discussing the printing of drawings created in AutoCAD. Engineer A says that
pen widths are stored in the AutoCAD file template. Engineer B says that the line type of an object could
be changed using the Properties panel. Which of the following statements is correct?
A. Only Engineer A is correct.
B. Neither Engineer A nor Engineer B is correct.
C. Both Engineer A and Engineer B are correct.
D. Only Engineer B is correct.

Correct: C...

This is only a preview of the solution. Please use the purchase button to see the entire solution

Related Homework Solutions

Autocad Dimensioning and Sectioning
Homework Solution
$70.00
Autocad
Dimensioning
Sectioning
Architecture
Questions
Drawing
Symbols
Line
View
Projection
Area
Command
Architecture Questions
Homework Solution
$75.00
Architecture
Design
Assembly Drawings
Isometric Pictures
AutoCAD
Engineers
Statements
Components
Threaded Holes
Leader Lines
Scratch
Diameter
Constructions
Pictorials
Get help from a qualified tutor
Live Chats