package com.laboon;

import java.util.*;

/**
* This class handles all actual execution of the program.
* Note that it is _extremely_ stateful - methods will modify the
* ProgramStack _ps and ProgramArea _pa, but will seldom return
* values. This adds a challenge to testing and may make doubling
* or mocking difficult!
*/

// Befunge Commands:
// + Addition: Pop two values a and b, then push the result of a+b
// - Subtraction: Pop two values a and b, then push the result of b-a
// * Multiplication: Pop two values a and b, then push the result of a*b
// / Integer division: Pop two values a and b, then push the result of b/a, rounded down. According to the specifications, if a is zero, ask the user what result they want.
// % Modulo: Pop two values a and b, then push the remainder of the integer division of b/a.
// ! Logical NOT: Pop a value. If the value is zero, push 1; otherwise, push zero.
// ` Greater than: Pop two values a and b, then push 1 if b>a, otherwise zero.
// > PC direction right
// < PC direction left
// ^ PC direction up
// v PC direction down
// ? Random PC direction
// _ Horizontal IF: pop a value; set direction to right if value=0, set to left otherwise
// | Vertical IF: pop a value; set direction to down if value=0, set to up otherwise
// " Toggle stringmode (push each character's ASCII value all the way up to the next ")
// : Duplicate top stack value
// \ Swap top stack values
// $ Pop (remove) top stack value and discard
// . Pop top of stack and output as integer
// , Pop top of stack and output as ASCII character
// # Bridge: jump over next command in the current direction of the current PC
// g A "get" call (a way to retrieve data in storage). Pop two values y and x, then push the ASCII value of the character at that position in the program. If (x,y) is out of bounds, push 0
// p A "put" call (a way to store a value for later use). Pop three values y, x and v, then change the character at the position (x,y) in the program to the character with ASCII value v
// & Get integer from user and push it
// ~ Get character from user and push it
// @ End program
// 0 – 9 Push corresponding number onto the stack

public class ProgramExecutor {

// Random number generator. Used solely for the '?' opcode.
// Static because we don't really need a new RNG for each program
// Also, no worries about thread safety since program execution is
// single-threaded
public static Random _r = new Random();

// A reference to the MainPanel, which will allow us to update
// the stack and output areas.
private MainPanel _mp;

// True if program has completed execution; false otherwise.
private boolean _programComplete = false;

// A reference to a ProgramArea (i.e., the array with the code in it)
public ProgramArea _pa;

// The ProgramStack for this program.
public ProgramStack _ps;

// The current direction of the PC. It starts moving right but
// can be modified by the '<', '>', '^' and 'v' opcodes.
public Direction _d = Direction.RIGHT;

// The current (x, y) location of the PC.
private int _x = 0;
private int _y = 0;

// True if anything to update on text area, false otherwise
private boolean _updateTa = false;

// True if anything to update on stack area, false otherwise
private boolean _updateStack = false;

// True if anything to update on output area, false otherwise
private boolean _updateOutput = false;

// Whether or not we are currently reading the input in as a string.
// The opcode '"' puts us into string mode when first encountered, and
// will exit that mode when a second '"' opcode is encountered.
public boolean _inStringMode = false;

private static int counter = 0;

private static boolean comment = false;

public void executeInstruction(char c) {

if (comment == true && c != ')') {
   return;
}

// If the stack is empty, and is not otherwise caught,
// ignore the instruction
try {
   // Default variables, re-used throughout the big switch..case
   int a = 0;
   int b = 0;
   int x = 0;
   int y = 0;

   // Uncomment for debugging info
   // System.out.println("String mode?" + _inStringMode);

   // If we are in string mode, read in char as the int version
   // of its ASCII value.

   if (_inStringMode) {
   if (c == '"') {
      // Uncomment for debugging info
      // System.out.println("Leaving string mode...");
      // Leave string mode
      _inStringMode = false;
   } else {
      // Get int version of character, put it on the stack
      int intC = (int) c;
      _ps.push(intC);
   }
   return;
   }

   // If not in string entry mode, we are executing instructions

   switch (c) {

   case 'i':
      counter++;
      break;

   case 'd':
      counter--;
      break;

   case 't':
      _ps.push(counter);
      break;

   case 'r':
      _ps.reverse();
      break;

   case '(':
      comment = true;
      break;

   case ')':
      comment = false;
      break;

   // (space) - ignore
   case ' ':
      // DO NOTHING, KEEP MOVING
      break;

      // + Addition: Pop two values a and b, then push the result of a+b
   case '+':
      add();
      break;

      // - Subtraction: Pop two values a and b, then push the result of b-a
   case '-':
      subtract();
      break;

      // * Multiplication: Pop two values a and b, then push the result of a*b
   case '*':
      multiply();
      break;

      // / Integer division: Pop two values a and b, then push the result of b/a, rounded down. According to the specifications, if a is zero, ask the user what result they want.
   case '/':
      divide();
      break;

      // % Modulo: Pop two values a and b, then push the remainder of the integer division of b/a.
   case '%':
      modulo();
      break;

      // ! Logical NOT: Pop a value. If the value is zero, push 1; otherwise, push zero.
   case '!':
      not();
      break;

      // ` Greater than: Pop two values a and b, then push 1 if b>a, otherwise zero.
   case '`':
      greaterThan();
      break;

      // > PC direction right
   case '>':
      _d = Direction.RIGHT;
      break;

      // < PC direction left
   case '<':
      _d = Direction.LEFT;
      break;

      // ^ PC direction up
   case '^':
      _d = Direction.UP;
      break;

      // v PC direction down
   case 'v':
      _d = Direction.DOWN;
      break;

      // ? Random PC direction
   case '?':
      randomDir();
      break;

      // _ Horizontal IF: pop a value; set direction to right if value=0, set to left otherwise
   case '_':
      horizontalIf();
      break;

      // | Vertical IF: pop a value; set direction to down if value=0, set to up otherwise
   case '|':
      verticalIf();
      break;

      // " Toggle stringmode (push each character's ASCII value all the way up to the next ")
   case '"':
      _inStringMode = true;
      break;

      // : Duplicate top stack value
      case ':':
         duplicate();
         break;

         // \ Swap top stack values
   case '\\':
      swap();
      break;

      // $ Pop (remove) top stack value and discard
   case '$':
      pop();
      break;

      // . Pop top of stack and output as integer
   case '.':
      printInt();
      break;

      // , Pop top of stack and output as ASCII character
   case ',':
      printChar();
      break;

      // # Bridge: jump over next command in the current direction of the current PC
   case '#':
      // Move but don't execute
      moveOneSpace();
      break;

      // g A "get" call (a way to retrieve data in storage). Pop two values y and x, then push the ASCII value of the character at that position in the program. If (x,y) is out of bounds, push 0
   case 'g':
      get();
      break;

      // p A "put" call (a way to store a value for later use). Pop three values y, x and v, then change the character at the position (x,y) in the program to the character with ASCII value v
   case 'p':
      put();
      break;

      // & Get integer from user and push it
   case '&':
      getInt();
      break;

      // ~ Get character from user and push it
   case '~':
      getChar();
      break;

      // @ End program
   case '@':
      _programComplete = true;
      counter = 0;
      break;
      // 0 – 9 Push corresponding number onto the stack
   case '0':
   case '1':
   case '2':
   case '3':
   case '4':
   case '5':
   case '6':
   case '7':
   case '8':
   case '9':
      int intC = Character.g

1. Write an application that extends JPanel and displays a phrase...