# A key design decision for ATM was the data field size (L) of each c...

## Question

A key design decision for ATM was the data field size (L) of each cell. Define Transmission efficiency E= L/(L+H), where L is the data field size and H is the header field size of the cells (in octets).
Packetization delay D is the time needed to fill a cell before transmission.

For voice streaming at 32 kpbs and 64 kpbs
1. Plot packetization delay as a function of L for these two data rates, let L={1, 100}.

2. Plot transmission efficiency as a function of L, let L={1, 100} and H=5.

Comment on the results.

## Solution Preview

These solutions may offer step-by-step problem-solving explanations or good writing examples that include modern styles of formatting and construction of bibliographies out of text citations and references. Students may use these solutions for personal skill-building and practice. Unethical use is strictly forbidden.

1).
The packetization delay is computed as data size (without header)/ data rate (the results from P1 and P2 from Excel document are expressed in miliseconds).
It can be noticed that packetization values for the data rate of 64kbps (P1 from the plot) are twice lower than the packetization values for 32kbps data rate (P2 from the plot)....

By purchasing this solution you'll be able to access the following files:
Solution1.docx and Solution2.xlsx.

\$15.00
for this solution

or FREE if you
register a new account!

PayPal, G Pay, ApplePay, Amazon Pay, and all major credit cards accepted.

### Find A Tutor

View available Network Management and Data Communication Tutors

Get College Homework Help.

Are you sure you don't want to upload any files?

Fast tutor response requires as much info as possible.