QuestionQuestion

Write a Matlab code to sample 10 channels of analogue signal through the data acquisition board at a frequency of 100 samples/s for a duration of 1.5 seconds. You need to use the following commands shown below. Study the format of each command using the help function in Matlab and assign proper values to parameters (shown as value below). In our code explain what each line does as a comment. Include the Matlab code into your assignment.
AI=analoginput('nidaq',1);
addchannel(AI,value);
set(AI,'SampleRate',value);
set(AI,'SamplesPerTrigger',value);
AI.TriggerType='Immediate';
AI.InputType='SingleEnded';
start(AI);
getdata(AI);

Solution PreviewSolution Preview

This material may consist of step-by-step explanations on how to solve a problem or examples of proper writing, including the use of citations, references, bibliographies, and formatting. This material is made available for the sole purpose of studying and learning - misuse is strictly forbidden.

%Clearing memory and screen
clear;
clc;

AI=analoginput('nidaq',1);
%Creates the analog input object AI for the specified adaptor 'nidaq' and for the hardware device with device identifier 1.

addchannel(AI,10);
%Add 10 hardware channels to analog input AI....
$50.00 for this solution

PayPal, G Pay, ApplePay, Amazon Pay, and all major credit cards accepted.

Find A Tutor

View available MATLAB for Engineering Tutors

Get College Homework Help.

Are you sure you don't want to upload any files?

Fast tutor response requires as much info as possible.

Decision:
Upload a file
Continue without uploading

SUBMIT YOUR HOMEWORK
We couldn't find that subject.
Please select the best match from the list below.

We'll send you an email right away. If it's not in your inbox, check your spam folder.

  • 1
  • 2
  • 3
Live Chats