QuestionQuestion

6- Draw a circuit whose output goes to +Vsat when the input signal is below -4V. The output should be at -Vsat when the input is above -4V
7- Using Multisim, simulate the circuit of problem 6. submit the Multisim schematics and simulation results. (use +/1 12V for the supply voltage.)

Solution PreviewSolution Preview

This material may consist of step-by-step explanations on how to solve a problem or examples of proper writing, including the use of citations, references, bibliographies, and formatting. This material is made available for the sole purpose of studying and learning - misuse is strictly forbidden.

The purpose of this project is to design an amplifier circuit using the LM741 with the following logic:
• The output goes to +Vsat when the input is below -4V
• The output goes to -Vsat when the input is above -4V

This is implemented using the LM741 operational amplifier open-loop, where it will act as a comparator. By using the high open loop gain of the amplifier, the output will swing to the saturated rail when the voltage difference across the input pins is a particular...
$75.00 for this solution

PayPal, G Pay, ApplePay, Amazon Pay, and all major credit cards accepted.

Find A Tutor

View available Electrical Engineering Tutors

Get College Homework Help.

Are you sure you don't want to upload any files?

Fast tutor response requires as much info as possible.

Decision:
Upload a file
Continue without uploading

SUBMIT YOUR HOMEWORK
We couldn't find that subject.
Please select the best match from the list below.

We'll send you an email right away. If it's not in your inbox, check your spam folder.

  • 1
  • 2
  • 3
Live Chats